Precision Flow Measurement for Clean Liquids and Gases
Chunamur Labs supplies turbine flowmeters for accurate and repeatable measurement of clean, low-viscosity liquids and gases across industrial applications.
Turbine flowmeters measure flow by detecting the rotational speed of a multi-bladed rotor installed in the fluid stream. The rotor speed is proportional to the fluid velocity, and the resulting pulse signal is converted into volumetric flow rate using a calibration constant called the K-factor.

What Are Turbine Flowmeters?
A turbine flowmeter is a velocity-based flow measurement instrument used to measure the volumetric flow of liquids or gases.
As the fluid passes through the meter body, it rotates the internal turbine rotor. A pickup sensor detects the rotor movement and generates electrical pulses. The pulse frequency is proportional to the flow rate.
Turbine flowmeters are widely used where high repeatability, fast response and reliable volumetric measurement are required.
Typical Specifications
| Parameter | Typical Specification |
|---|---|
| Measuring Principle | Turbine rotor-based velocity measurement |
| Measurement Type | Volumetric flow measurement |
| Applicable Media | Clean liquids and gases |
| Typical Liquids | Water, diesel, fuel, oil, solvents, and clean process liquids |
| Flow Direction | Inline, straight-through flow |
| Nominal Pipe Size | Approximately DN4 to DN300, depending on configuration |
| Flow Range | Approximately 0.03 to 15,000 GPM for selected liquid designs |
| Accuracy | Typically ±0.25% to ±1.0% of reading, depending on model and calibration |
| Repeatability | Typically ±0.05% to ±0.2% |
| Turndown Ratio | Typically 10:1 to 20:1, depending on the application |
| Rotor Material | Stainless steel or other application-compatible materials |
| Body Material | Stainless steel, carbon steel or other selected materials |
| Bearing Type | Ball bearing or fluid-lubricated bearing, depending on design |
| Medium Temperature | Typically –20°C to +150°C; special versions may support wider ranges |
| Process Pressure | Application-dependent; high-pressure versions are available |
| Output Signal | Pulse, frequency, 4–20 mA |
| Communication | RS485, Modbus, or HART, depending on configuration |
| Power Supply | Typically 24 VDC for electronic transmitters |
| Display | Optional local flow and totalizer display |
| Protection Rating | Typically IP65 or IP67, depending on configuration |
| Process Connection | Threaded, flanged, or selected sanitary connection |
| Calibration | Factory calibration with individual K-factor |
| Installation | A straight pipe run is required upstream and downstream. |
Specifications depend on pipe size, fluid properties, pressure, temperature, rotor design, and selected configuration.
Key Characteristics
- High measurement repeatability
- Fast response to flow changes
- Compact and robust construction
- Suitable for clean, low-viscosity fluids
- Pulse output for totalization and flow computers
- Optional 4–20 mA and digital communication
- Suitable for high-pressure applications
- Available in inline and insertion designs
- Individual K-factor calibration
- Low maintenance when used with suitable fluids
Applications
- Oil & Gas
- Aerospace & Defense
- Automotive
- Industrial Manufacturing
- Power & Energy
- Water & Utilities
- Chemical Processing
- Fuel Dispensing
- Test Benches
- Machine and OEM Integration
- Lubrication Systems
- Cryogenic Applications
Chunamur Labs Supply
Chunamur Labs offers selection and supply of turbine flowmeters for industrial flow measurement, fuel and oil measurement, water and process-liquid measurement, test benches, validation systems, flow monitoring, totalization, and OEM machine integration.
We help customers select the appropriate turbine flowmeter based on fluid type, flow range, pressure, temperature, accuracy, and output requirements.
