6-Axis DIN Flange-Type Load Cells

The 6ADF100 6-Axis DIN Flange-Type Load Cell is a compact multi-axis force and torque sensor designed to measure three forces (Fx, Fy, Fz) and three moments (Mx, My, Mz) simultaneously.

The sensor incorporates six independent full-bridge strain-gauge channels to provide mV/V outputs for the six measurement axes. A 36-term calibration coefficient matrix is provided for calculating the force and torque values on each axis, enabling accurate multi-axis force measurement.

With its compact aluminum construction, DIN EN ISO 9409-1 mounting interface, and multiple force and torque capacity options, the 6ADF100 is suitable for robotics, aerospace, automotive testing, industrial automation, research and development, and biomechanical applications.

chatgpt image sep 25, 2026, 09 55 25 pm

Key Features

  • 6-axis simultaneous force and torque measurement
  • Measures Fx, Fy, Fz, Mx, My and Mz
  • Six independent full-bridge strain-gauge outputs
  • Compact and lightweight aluminium construction
  • DIN EN ISO 9409-1 mounting interface
  • Central through-hole design
  • 36-term calibration coefficient matrix
  • IP64 protection
  • Available in multiple force and torque capacities
  • Optional CANbus interface
  • Optional multi-pin connector configurations
  • Optional 8-channel amplifier with USB PC interface

Measurement Axes

The 6ADF100 measures forces and moments in all three spatial axes.

Linear Forces

Fx – Force along the X-axis
Fy – Force along the Y-axis
Fz – Force along the Z-axis

Moments / Torques

Mx – Moment about the X-axis
My – Moment about the Y-axis
Mz – Moment about the Z-axis

This enables simultaneous measurement of the complete six-axis force and torque vector.

Main Applications

  • Robotics & Automation – Robot end-effector force measurement, robotic assembly, force-controlled systems, and robot testing.
  • Automotive Testing – Component testing, actuator testing, vehicle and subsystem force measurement, and test benches.
  • Aerospace Testing – Actuator, mechanism, and structural testing requiring multi-axis force and torque measurement.
  • Industrial Test & Measurement – Multi-axis test fixtures, product validation, R&D, and force/torque test systems.
  • Research & Development – Experimental force measurement, laboratory testing, and prototype evaluation.
  • Biomechanical Testing – Measurement of multi-directional forces and moments in research and testing applications.

6-Axis DIN Flange-Type Load Cells – Model Specifications

Specification6ADF80A6ADF80B6ADF100A6ADF100B
Fx100 N300 N200 N600 N
Fy100 N300 N200 N600 N
Fz200 N600 N400 N1200 N
Mx10 Nm30 Nm20 Nm60 Nm
My10 Nm30 Nm20 Nm60 Nm
Mz10 Nm30 Nm20 Nm60 Nm
Diameter80 mm80 mm100 mm100 mm
Height40 mm40 mm40 mm40 mm
Through Hole20 mm20 mm25 mm25 mm
Weight320 g320 g470 g470 g
MaterialAluminium AlloyAluminium AlloyAluminium AlloyAluminium Alloy
ProtectionIP64IP64IP64IP64
MountingDIN EN ISO 9409-1DIN EN ISO 9409-1DIN EN ISO 9409-1DIN EN ISO 9409-1
Nominal Output<1 mV/V<1 mV/V<1 mV/V<1 mV/V

Why Choose a 6-Axis Force & Torque Sensor?

A conventional load cell generally measures force along one primary axis. A 6-axis force and torque sensor provides simultaneous information about forces and moments in three dimensions.

This makes it useful for applications where the direction and distribution of applied forces need to be understood rather than measuring only a single force component.

The 6ADF100 provides:

3 Forces + 3 Moments = 6-Axis Measurement

Fx + Fy + Fz + Mx + My + Mz

Need Help Selecting the Right Capacity?

Selecting the correct 6-axis sensor depends on the expected maximum force, torque, mounting arrangement, operating environment and required measurement accuracy.

For assistance in selecting the appropriate 6ADF100 configuration, please provide your application details and required force/torque ranges.

Contact Chunamur Labs for 6-Axis Force & Torque Sensor selection, technical support and application assistance.

Contact Us

Scroll to Top