Accurate Liquid Flow Measurement for Water, Wastewater, and Industrial Applications
Chunamur Labs supplies electromagnetic flowmeters designed for accurate and reliable flow measurement in water treatment plants, wastewater systems, chemical processing, industrial processes, irrigation systems, and other conductive-liquid applications.
These flowmeters use the electromagnetic induction principle to measure liquid flow. With no moving parts inside the measuring tube, they provide reliable operation, low maintenance, and long-term measurement stability.

What Are Electromagnetic Flowmeters?
Electromagnetic flowmeters, also known as magnetic flowmeters, measure the flow rate of electrically conductive liquids using Faraday’s law of electromagnetic induction.
When a conductive liquid passes through a magnetic field, a small voltage is generated. This voltage is proportional to the velocity of the liquid and is used to calculate the flow rate.
Electromagnetic flowmeters are suitable for:
- Water
- Wastewater
- Sewage
- Slurries
- Acids and alkalis
- Chemical solutions
- Industrial process liquids
- Conductive water-based fluids
Typical Specifications
| Measuring Principle | Electromagnetic induction |
| Flow Measurement | Volume flow and totalized volume |
| Installation Type | Inline |
| Applicable Medium | Electrically conductive liquids |
| Minimum Conductivity | Typically ≥ 5 µS/cm; model-dependent |
| Measuring Range | Model- and pipe-size-dependent |
| Pipe Size | Small to large pipeline sizes, depending on configuration |
| Accuracy | Up to ±0.2% of reading, depending on configuration |
| Liner Material | Hard rubber, polyurethane, PTFE, or other options |
| Electrode Material | 316L stainless steel, Alloy C22, or other options |
| Medium Temperature | Liner- and application-dependent |
| Operating Pressure | Up to PN40 / Class 300 / 20K, depending on configuration |
| Flow Direction | Forward and reverse flow measurement |
| Output | 4–20 mA, pulse/frequency, and status output |
| Communication | HART, Modbus RS485, PROFIBUS, PROFINET, and other options |
| Display | Local transmitter display, depending on configuration |
| Power Supply | AC or DC supply, depending on configuration |
| Process Connection | Flanged or other connection options, depending on configuration |
| Protection | Model- and configuration-dependent IP rating |
Specifications depend on the selected size, liner, electrode material, process connection, transmitter, and operating conditions.
Key Characteristics
- Accurate volume flow measurement
- No moving parts
- Low maintenance requirements
- No mechanical obstruction inside the measuring tube
- Suitable for electrically conductive liquids
- Suitable for clean liquids and liquids containing suspended solids
- Forward and reverse flow measurement
- Excellent repeatability
- Multiple liner and electrode material options
- Multiple output and communication options
- Suitable for continuous industrial operation
- Low pressure loss through the measuring tube
Typical Applications
- Water Treatment Plants
- Wastewater & Sewage Treatment
- Chemical Processing
- Industrial Process Monitoring
- Irrigation Systems
- Agricultural Water Management
- Cooling-Water Systems
- Pulp & Paper Industries
- Food & Beverage Industries
- Mining & Slurry Applications
- Pharmaceutical Water Systems
- Utility Flow Measurement
Electromagnetic Flowmeter Supply
Chunamur Labs supplies electromagnetic flowmeters based on the required fluid conductivity, flow range, pipe size, operating pressure, temperature, accuracy, liner material, electrode material, process connection, output, and communication requirements.
Electromagnetic flowmeters are suitable for electrically conductive liquids. They are generally not suitable for:
- Conventional mineral-based hydraulic oil
- Most petroleum-based oils
- Non-conductive synthetic oils
- Gases
- Steam
- Other non-conductive fluids
For water-based or conductive hydraulic fluids, suitability must be confirmed by checking the actual fluid conductivity and operating conditions.
We can also support flow measurement integration, installation guidance, signal conditioning, calibration verification, and DAQ selection for industrial test and validation systems.
Looking for an electromagnetic flowmeter?
Share your fluid type, conductivity, pipe size, flow range, operating pressure, temperature, accuracy, process connection, and output requirement with us. Chunamur Labs can recommend and supply a suitable electromagnetic flowmeter for your application.
